background image

Operation   |   9 

8   |   Operation

Charger On-Board 

Battery LEDs

•  While charging the on-

board battery with the 
power cord, the 4 LEDs 
will be: 

 

–  Glowing while charging

 

–  Solid when charged

•  When charging the hearing aids without the 

power cord attached, the LEDs turn off after 10 
seconds.

•   To illuminate LEDs, remove a hearing aid from 

its charging port/post for three seconds and then 
replace it. LEDs illuminate for 10 seconds before 
turning off again. 

 

–  4 Solid > 75%

 

–  3 Solid < 75%

 

–  2 Solid < 50%

 

–  1 Solid < 25%

 

–  1 Blinking = Charge Low

Power On & Off

ON -

  The hearing aids will power on automatically after 

removing them from the charger. There is a delay 
that allows you time to insert your hearing aid into 
your ear. 

ON -

  If the hearing aid is manually powered off, pressing 

the user control for three seconds will power it 
on. The delay exists to give you time to insert the 
hearing aid into your ear. 

OFF -

  The hearing aids will power off automatically when 

placed in the charging port/post and charging 
begins.

OFF -

  The hearing aids can be powered off manually by 

pressing the user control for three seconds.

Summary of Contents for Custom Charger












Reviews: