STARKE ARVID Vakuflex 280, Operating Instructions Manual

Page: 4 / 25

Starke Arvid AB Tel: +46 522 - 22 000 Fax: +46 522 - 22 344
Lyckåsvägen 3
www.starkearvid.se office@starkearvid.seSe
SE-459 30 Ljungskile
Sida 4 av 25
Technical Description
Vakuflex 280 is a network-independent vacuum device, made for using with a crane or
other lifting facilities. Due to its different configuration possibilities, the Vakuflex 280 can
be used in several transport requirements.
Some examples as follows:
The transport element can be turned by 360° and swivelled by 90°.
rotating swivelling
Two closed vacuum circuits prevent a vacuum lost in case of power failure.
Each vacuum circuit is equipped with a storage tank including a non-return valve, a vacu-
um switch and a checking vacuum gauge. Two vacuum pumps will be used to generate a
vacuum (one pump per vacuum circuit). Two vacuum pumps are used to generate the
vacuum (one vacuum pump each vacuum circuit). The vacuum pumps work without oil
lubrication and are therefore maintenance-free.
Particularly, the device consists of one main frame including four swinging rectangular
tubes and the loading arms including its suctions. The main frame exists of two vacuum
storage tanks, vacuum pumps, a battery charger and a battery. The sucker connections
are supplied with a vacuum (suction) or normal compressed air (releasing) by means of
the manual valves (suction/release valves) of the two vacuum circuits. The suckers (two
per vacuum circuit) can be blocked individually using vacuum couplings. Two inspection
90°
360°