Page
5
/
30
2.
INTENDED USE
STARK U-plows are designed for plowing and moving snow from yards and streets. U-
plow’s wings of turn 180° and it
has wide turning angle ensuring its usability in different kinds of areas.
Using to plow or move heavier material than snow is prohibited and will terminate warranty.
3.
SAFETY INSTRUCTIONS
Familiarise yourself with the attachment before taking it in use. The plow should be operated only by proficient users.
Before connecting hydraulics to the plow, please check:
-
there is no one between the attachment and base machine
-
the base machine is turned off and the parking brake is on
When connecting the attachment to base machine, please pay attention:
-
that the locking pins and cotter pins are fine
-
there is no pressure in the hydraulics system
-
that the hydraulic plumbing is intact
-
when connecting the hydraulics avoid skin contact with hydraulic fluid
-
do not pull from the hose, only from the coupling
While operating, please pay attention:
-
safe and appropriate speed
-
other traffic, people and animals
-
danger zones and visual obstacles
-
device should not be used when someone is in the danger zone
-
be careful around children
-
use flashing light while plowing
-
do not go under the plow
While servicing
the plow, the base machine’s hydraulics must be switched off, the base machine turned off and the
parking brake put on. The plow must be lowered on supports if going under the plow is required. Never go under the
plow if it is not supported.
Daily maintenance:
-
check the overall condition of structures, make repairs if needed
-
check the condition of hydraulic hoses and couplings, change if damaged
-
check the condition of wear blades, adjust or change if needed.
See” Adjusting
blades”
Maintenance every 50 hours:
-
lubricate the lubrication points (locations are given in product specific section)
-
check the tightness of the bolts and nuts
Check the tightness of bolts and nuts after first time in use!
If the plow is left unused for a long time, it needs to be cleaned well and lubricated before storage.
BEWARE pressurised hydraulic hoses and components!
