Sivu 10 / 20
7.2.
Adjusting the mud guard
Mud guard can be tilted in order to increase clearance between rotating bristles and mud guard for example brushing
snow. Mud guard can be tilted by opening lower bolts from mud guard arc and moving inner holes in line with the
mounting holes and inserting bolts back.
Picture 4. Mud guard in upper position.
7.3.
Changing the brush rings (S-model)
1.
Support brush well, so that it cannot tilt during change work.
2.
Remove hydraulic hoses from engine side and cover connectors with plugs.
3.
Loosen engine mounting plate (2pcs M16 bolts) and bearing mounting plate (2pcs M16 bolts).
4.
Take roll off from side plates.
5.
Remove locking plates from roll end, 2pcs, total 6pcs M10 hex-socket screws.
6.
Take old lamellas off from roll and replace with new ones.