16
Lametal Oy
Kaskenviertäjäntie 2, 73100 Lapinlahti
Y-tunnus: 0315668-4
p. 017 731 565
www.stark.fi
•
When using the device on public roads, road traffic laws and
regulations must be complied with
•
Please note the device width, weight and other factors that affect
drivability. Adjust the working speed according to conditions. Please
also ensure that there are no people in the area of work
•
Before removing the hydraulic hoses the machine should be firmly on
the ground
•
Use original spare parts only
2.
Intended use
Stark RF700 turning device is designed and intended as optional tool for
Stark street sweepers to turn the device. The turning device allows
brushing with a bucket brush when moving forward with the machine,
with the bucket being simultaneously turned back. The turning device is
capable of brushing the edges of the paving stones, for example. The RF-
700 turning device is suitable for use with KAH-1600, -1800 and -2000
models. The turning device allows the bucket brush to be turned 180
degrees from the forward position to the opposite direction.
3.
Getting started
The turning device is attached to a floating frame on the bucket brush by
four pins, lockable by retaining rings (shown in Figure 1, item 2). The
floating frame itself is fixed to the bucket brush by eight bolts (Figure 1,
item 1). If you are installing the turning device as a retrofit, tighten the
floating frame bolts: 8 x DIN 933 8.8 M24, recommended tightening
torque 680 Nm.
Limiting chains must be installed between the bucket brush frame and
lifting boom, on both sides. The chain prevents the boom from rising too