7
keep the machine in conditions of temperature from +1°С to +35°С and humidity
not more than 80%;
provide proper conditions of storage of the discs. Consult the information
provided by the disc manufacturer as to this point.
Maintenance
For safe and reliable operation please remember that repairing, maintenance and
adjustment of the machine of Stark brand is to be made in the special service centers of
Stark company with applying only original spare parts.
Safety instruction while working with angle grinder
1.
Don’t use the machine without wheel-guard.
2.
Use only wheels with correct size and wheels having a maximum operating speed at
least as high as the highest No Load Speed marked on the tool's nameplate. When
using grinding wheels, be sure to use only fiberglass-reinforced wheels.
3.
Check the wheel carefully for cracks or damage before operation. Replace cracked or
damaged wheel immediately.
4.
Use only flanges specified for this tool.
5.
Do not damage the spindle, the flange (especially the Installing surface) or the lock
nut. Damage to these parts could result in wheel breakage.
6.
Keep hands away from rotating parts.
7.
Make sure the wheel is not contacting the work-piece before the switch is turned on.
8.
Before using the tool on an actual work piece, make a test run of the tool at the
highest no-load speed for al least 30 seconds in a safe position. Stop immediately if
there is any vibration or wobbling that could indicate poor installation or a poorly
balanced wheel. Check the tool to determine the cause.
9.
Watch out for flying sparks. Hold the tool so that sparks fly away from you and other
persons or flammable materials.
10.
Do not touch the work piece immediately after operation; It may be extremely hot and
could burn your skin.
11.
Always use eye and ear protection. Other personal protective equipment such as dust
mask, gloves, helmet and apron should be worn.
12.
Position the tool so that the power cord always stays behind the machine during
operation.
13.
Do not use the tool on any materials containing asbestos.
Safety Instruction
Attention! Observe the safety rules when using the machine to avoid
burning, electrical shock or other injuring.
1.
Make sure that the voltage of the power supply network as well as operation
conditions conforms to those described in this manual. Be especially prudent when
working in the zone of electric circuit wiring.
Autogoods “130”
130.com.ua
