Stark HD-21 Assembly Instructions Download Page 4

Page: 4 / 4

HAIR DRYER HD-21

ASSEMBLY INSTRUCTIONS

Circuit Diagram

Technological parameters

Voltage

：

220V—50Hz

Power

：

1200W MAX 540W MIN

Cautions

1 .Ensure the voltage of hair dryer is same with the

power supply.

2.please follow t he below safety frameworks when you

operate the hair dryer. Don’t operate the hair dryer when

your hands are wet. Don’t pull out the combined cord.

Don’t let the man who don't know how to operate the

hair dryer operate the hair dryer alone except monitored

by man.

3.Clean and keep hair dryer

Please pull out the power plug from electrical outlet

when you cleaning the hair dryer. Please pay attention

the hair to avoid absorbing in the inlet of hair dryer.

Please use the cleaning solution which the water with

soap to clean the housing of hair dryer, don’t use spray

liquid or abrasive. We don’t responsible for any danger

things if you don’t follow the above instructions.

Summary of Contents for HD-21

Page 1: ...the power switch the hair dryer without current when you don t operate it 2 High low heats and winds setting for choice 3 With spring button on the handle it works when you hand the handle and touch the spring button It doesn t work when you don t touch it The parts of the product ...

Page 2: ...ning ways to install 1 Please bore two holes with 6mm s diameter according the picture 2 2 Put the toggle inside the holes and tighten one screw to the toggle up tighten the other screw through the pothook and install it on the wall completely 3 Insert the pins in electrical outlet Turn on the switch that s ok Closing ways to install ...