3
Fig 1.1 Side view of the machine AG 1050
1.
Wheel guard.
2.
Shaft lock.
3.
ON/OFF switch.
4.
Lock button switch .
5.
Disc.
Operating instruction
Damage of the disc is possible even if the safety instructions are observed.
ALWAYS USE THE WHEEL GUARD even if you are going to use the machine
for the short period of time.
Before work
Check network voltage
: it should conform to the data on the machine’s label. Tool
labeled with the 230 V, can be also connected to a power source with a voltage of 220
volts.
Installation of the wheel guard
Always be sure that the tool is switched off and unplugged before attempting to perform
adjustment.
Install the wheel guard (1) in the position convenient for operating. Make sure that it occupied
the proper position and is not loose.
1
3
2
5
4
Autogoods “130”
130.com.ua
