manualshive.com logo in svg

Stark 71104, Owner'S Manual And Safety Instructions

Share
Download
Stark 71104 Owner'S Manual And Safety Instructions Download Page 4

3

WARNING! High Altitude Operation Above 3000 feet

At high altitudes, the engine’s carburetor, governor (if so equipped), and any other parts that control the fuel-

air ratio will need to be adjusted by a qualified mechanic to allow efficient high-altitude use and to prevent 

damage to the engine and any other devices used with this product. The fuel system on this engine may 

be influenced by operation at higher altitudes. Proper operation can be ensured by installing an altitude kit 

at altitudes higher than 3000 ft. above sea level. At elevations above 8000 ft, the engine may experience 

decreased performance, even with the proper main jet. Operating this engine without the proper altitude kit 

installed may increase the engine’s emissions and decrease fuel economy and performance. The kit should 

be installed by a qualified mechanic. 

DIAGRAM AND PARTS LIST

PARTS LIST

PRIMING CAP

MUFFLER

FUEL 

TANK

INTAKE PORT

WATER 

DRAIN PLUG

DISCHARGE PORT

AIR 

FILTER

STARTER

Summary of Contents for 71104











Reviews:

No comments

Brands by name

Popular brands

Load more brands