4)
Carefully remove the secondary mirror assembly from the front of the telescope. Do
not touch the surface of the mirror itself.
5)
Place the secondary mirror assembly into the holder. Note the notch on the side of
the secondary holder which accepts the small screw on the side of the mirror
assembly. Use the original retaining ring to lock the mirror assembly in place.
Attaching the CCD Camera
6)
Some CCD cameras require threaded adapters. Begin by removing the plastic cap
from the top (narrow end) of the HyperStar lens and attaching any required adapters.
7)
The CCD camera will attach to the HyperStar (or adapter) using T-threads. Most
cameras have a 1.25” or 2” nosepiece that must be removed to allow the HyperStar to
thread into the T-threads.
