background image

>> 2. Safety and Prevention of Accidents

 

Instruction manual • Staring  SM 340 • 

5 <<

 

 

 

 

 

Instruction Manual                    

All persons dealing with the use, installation, operation,

 

maintenance and repair must have read and understood 

the Instruction Manual.

 

 

 

Persons Responsible                 

The operator of the mixer is responsible for the fact that 

only persons who are quali

fied and have been instructed

 

in the operation of the machine operate, maintain or repair 

the mixer.

 

 

 

Purposeful Use                          

Mixers are machines for production of concrete, mortar 

and for processing of refractory materials. The mixer can 

handle solid materials without adding water or aggregates.

 

 

 

The mixer may only be used in accordance with the inten 

ded purpose and may  not be used for mixing of in

flamma 

ble or explosive materials. The mixer is not suitable for 

mixing of foodstuffs.

 

 
 

 

Power Supply                             

The mixer may not be connected to wall sockets. The con 

nection requires being wired into the supply provided. 

Cabling with a cross section of 5 x 1,5 mm2 and 2,5 mm2 

for 7,5 kW electric motor and approved socket outlet and 

plug must be used.

 

 

 

If the cables are defective the mixer may not be operated. 

Defective cables can be a danger to life. Use only cables 

and plugs which are fault free.

 

 

 

Danger to Persons

 

an Equipment                             

If the mixer is operated incorrectly and not in accordance 

with the intended purpose, damage to persons or equip 

ment may result. 

Therefor any incorrect use of 

the mixer is not allowed!

 

Summary of Contents for SM 340

















Reviews: