Computer Set Up
7
When the hardware setup for SR2611 is complete, you are now ready to turn the machine on.
1. After the hardware installation is complete, the SR2611 will be treated as one single hard
drive. Set the hard drive to AUTO in the computer’s BIOS. When the computer is turned on,
the system will retrieve the following information:
2. In SR2611, the installed hard drive can be detected by the Device Manager of Computer
Management
for
Windows
3. Customers can choose to format the hard drive by using the Disk Management tool of the
operating system before using the SR2611
At this point, the installation process is completely finished. The user can freely retrieve and
save data to SR2611 just like retrieving and saving data to a regular hard drive. If the user
experiences any abnormality during the operation, please refer to the trouble shooting Q&A
section in Appendix.
Computer Set Up
