Stardom itank i310, User Manual

Page: 5 / 19

iTANK i310 Series User Manual
3
4. Hardware Installation
Please follow the instructions below to complete the hardware installation.
1. Open the package and take out the product making sure that all the enclosed contents are not
damaged or missing. Should you find damages or missing contents, please contact your supplier
immediately.
2. Place the enclosure on a stable surface, ensure that it is well ventilated without blockage to the
vent and kept away from locations near water or where the product may become vulnerable
resulting in damages.
3. Use the ejector pin included in the accessory kit and inserted into the pin release opening to eject
the removable drive tray latch and extract the removable drive tray.
4. For 3.5" HDD/SSD, please secure it by use six the larger screws included in the accessory kit. For
2.5" HDD/SSD, please secure it by use four the smaller screws included in the accessory kit.
5. Choose one of the provided cables of your preference to connect the preferred interface
connection on the enclosure unit to the computer.
6. Depending on the type of computer USB port, select the corresponding USB cable in the
accessory to connect the computer to the USB port on the i310.
7. Connect the power cord to the power adapter, connect the connectors at both ends to the i310
and the power socket, and then start the i310.
8. After the computer is turned on, the storage capacity will be automatically recognized by the
operating system. After the storage capacity is recognized successfully, please format the system
according to your desired storage format and follow the instructions of the operating system. After
the hard disk is formatted, the i310 can be used directly.
5. Description of HDD Indicators
Status HDD Status Light
Data access Blue light flashing
HDD idle Blue light always on
Sleep mode Blue light off
※
If you are using a USB 3.2 C to A cable, the Type-A on the host side needs to be USB 3.2 Gen2
for best access performance.