Kylos and Kylos Compact Users Guide
www.starcomgpsglobal.com
43
NOTE:
If you're testing the unit inside the building, it will not be able to get a
GPS signal in most cases. In order to get a proper GPS location, the unit has
to be placed outside the building, or outside the window, where it can access
the satellites.
Open the Terminal window (
Communications > Advanced >
Communication Window > Configuration > Helios.1 > Open Terminal
)
and type
\tdg
(GPS mode). GPS readings will be displayed. When you see
"A,3"... reading, it will indicate a GPS fix signal.
