Kylos and Kylos Compact Users Guide
www.starcomgpsglobal.com
13
Emergency button
– button which sends an emergency alert.
Power button
– button which serves to turn the device on and off, and to
test the battery status.
LED indicators
– the LED indicator will light up when the unit is charging
or operating.
To turn the unit on
, press the Power button. The LED will flash 5
times with white light.
To turn the unit off
, press and hold the Power button until the LED
blinks 2 times and then turns off.
To send an Emergency alert
, press and hold the Emergency button
until the LED turns
green
. Then release the Emergency button, the
LED will blink
green
until the unit successfully sends a message (or 5
minutes have passed). The LED will blink
red
until the unit
successfully finds the GPS position (or 5 minutes have passed).
While the unit is charging
the
red
LED will light up, when fully
charged the
green
LED will light up.
To check the battery status
, press the Power button and hold it for a
second. If the LED turns
green
, the battery is fully charged. If the
LED turns
red
, the battery is used and needs charging.