- 11 -
Hard Starck Digital
nORmAL Time DiSPLAy
1. Press “•” to change mode. Mode sequence is: normal time, chronograph, timer, alarm.
2. Press “ ” for EL; press and hold “ ” for 2 seconds to toggle auto-EL on/off. When auto-EL is on,
pressing any pusher will turn on EL for 3 seconds.
3. Press “ ” to toggle chime on/off.
4. Press “ ” to flash time zone 1 or time zone 2; press and hold “ ” for 2 seconds to toggle time
zone 1/time zone 2.
NOTE: In any setting mode, press “•” at any time during setting sequence to exit setting mode.
All changes will be saved.
NOTE: In any setting mode, if no pushers are operated for 2 minutes, setting will automatically
return to display mode. No changes will be saved.
Time AnD DATe SeTTing
1. In normal time display, press and hold “•” for 3 seconds to enter setting mode; hour will begin
to flash.
2. Press “ ” to increase digit; press and hold “ ” for fast advance.
3. Press “ ” to set and advance to next setting value.
4. Setting sequence is: hour, minute, seconds, 12/24-hour format, year, month, date.
5. Press “•” to save and exit setting mode.
NOTE: Weekday will automatically update upon exiting setting mode.
CHROnOgRAPH mODe
1. Press “•” to change to chronograph mode.
2. Press “ ” to start/stop the chronograph.
3. Press “ ” to reset when the chronograph is stopped.
4. For split time, press “ ” while the chronograph is running (“CHRO” will flash in lower right
display for 5 seconds and then return to chronograph).
NOTE: “O” in “CHRO” will flash in lower right display in any other mode if the chronograph is
still counting.
TimeR mODe
1. Press “•” to change to timer mode.
2. Press “ ” to start/stop timer.
3. Press “ ” to reset timer to preset value when the timer is stopped.
NOTE: When timer reaches zero, the “•”symbol in “TMR•” will flash in lower right display in
any other mode if the timer is still counting.
TimeR SeTTing
1. In timer mode, press and hold “•” for 2 seconds to enter setting mode; minute will flash.
2. Press “ ” to increase digit; press and hold “ ” for fast advance.
3. Press “ ” to set and advance to seconds.
4. Press “ ” to increase digit; press and hold “ ” for fast advance.
5. Press “•” to save and exit setting mode.
ALARm mODe
1. Press “•” to change to alarm mode; “ALM 1” or “ALM 2” will flash twice.
2. Press “ ” to toggle alarm on/off.
NOTE: Alarm will sound for 15 seconds; press any pusher to silence alarm.
NOTE: Alarm 1 is only for time zone 1; alarm 2 is only for time zone 2. Alarm will toggle
automatically when time zones are changed.
ALARm SeTTing
1. In alarm mode, press and hold “•” for 2 seconds to enter setting mode; hour will begin flashing.
2. Press “ ” to increase digit; press and hold “ ” for fast advance.
3. Press “ ” to set and advance to minute.
4. Press “ ” to increase digit; press and hold “ ” for fast advance.
5. Press “•” to save and exit setting mode.