background image

 

 
StarBand

®

 Installation and User Guide

  

 

26 

FCC Compliance Notice of StarBand Equipment  

NOTE: 

 This equipment has been tested and found to comply with the 

limits for a Class B digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation.  This 
equipment generates, uses and can radiate radio frequency energy 
and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications.  
 
However, there is no guarantee that interference will not occur in a 
particular installation.  If this equipment does cause harmful 
interference to radio or television reception, which can be determined 
by turning the equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following measures:  
 

 

Reorient or relocate the (radio or TV) receiving antenna.  

 

Increase the separation between the equipment and receiver. 

 

Connect the equipment into an outlet on a circuit different 
from that to which the receiver is connected.  

 

Consult the dealer or an experienced radio/TV technician for 
help.  

 
Copyright 2006 Spacenet Inc. All rights reserved. This document may 
not be reproduced in whole or in part without the express written 
consent of Spacenet Inc.  
 
 
Spacenet®, StarBand® and SkyEdge are trademarks of Spacenet Inc. 
All other product names referenced herein are trademarks of their 
respective owners.  
 

Summary of Contents for SkyEdge





























Reviews: