1
HANDLING NOTES
At the installation:
1) Install the TCP100/2000 reader/writer on a flat surface. Minimize any
shock or vibration to the reader/writer, as shock or vibration may cause
injury and/or failure.
2) Keep the TCP100/2000 reader/writer away from hands of the children.
3) Do not use or leave the TCP100/2000 reader/writer in direct sunshine or
near a source of heat such as fire or stove. It may cause generation of
heat which can bring failure, malfunction, skin burn, etc.
4) Keep the TCP100/2000 reader/writer away from liquids such as water,
oil, etc. Do not use or leave TCP100/2000 reader/writer in high humid-
ity.
5) Keep the TCP100/2000 reader/writer away from dust, metal powder,
etc.
6) Keep the TCP100/2000 reader/writer away from corrosive gases, flam-
mable gas, chemicals or steams. Exposure may cause generation of heat,
electric shock, malfunction, etc.
7) Keep the TCP100/2000 reader/writer away from magnetic sources to
avoid erasing or damaging data stored on card.
8) Do not use the power supply in the unspecified range. This may cause
generation of heat, electric shock, malfunction, etc.
9) Make sure that the power cable is plugged close enough to disconnect
immediately when the unusual is found.
10) Do not connect the AC power plug to the same outlet used for other
electrical noise generation devises, such as an electrical motor, etc. This
may cause malfunction, failure, etc.
11) Make sure that the power cable is plugged into the outlet certainly. The
earth terminal should be grounded to avoid electric shock, failure, etc.
12) Provide enough room around the TCP100/2000 reader/writer. If not, it
may cause generation of heat, malfunction, failure, etc.
13) Do not leave the cleaning liquid in direct sunshine or near a source of
heat such as fire or stove. It may cause generation of heat which can
bring skin burn, etc.
14) Do not drink or drop in your eyes the cleaning liquid. It may cause
damage to your body.
15) Keep the cleaning liquid away from hands of the children.
1
