Star SST-20 Installation And Operation Instructions Manual Download Page 3

2

M-Z3235; SST Series 

Drawer Roll / Bun W

armer

3

GENERAL INSTALLATION DATA

This equipment is designed and sold for commercial use only by personnel trained and experienced 

in its operation and is not sold for consumer use in and around the home nor for use directly by the 

general public in food service locations.
Before using your new equipment, read and understand all the instructions & labels associated with 

the unit prior to putting it into operation.  Make sure all people associated with its use understand the 

units operation & safety before they use the unit.
All shipping containers should be checked for freight damage both visible and concealed.  This 

unit has been tested and carefully packaged to insure delivery of your unit in perfect condition.  If 

equipment is received in damaged condition, either apparent or concealed, a claim must be made 

with the delivering carrier.
Concealed damage or loss - if damage or loss is not apparent until after equipment is unpacked, a 

request for inspection of concealed damage must be made with carrier within 15 days.  Be certain to 

retain all contents plus external and internal packaging materials for inspection.  The carrier will make 

an inspection and will supply necessary claim forms.

INSTALLATION

This bun warmer is equipped for the voltage shown on the nameplate.  It will operate on alternating 

current only; however, the correct voltage must be applied.  The unit should be installed by a qualified 

installer.

DO NOT CONNECT TO DIRECT CURRENT (DC).

GENERAL OPERATING PROCEDURES

Using the power switch, turn the unit on.  The pilot light on the front of the unit will indicate when the 

power is on.  Select a setting on the thermostat for warming or holding rolls.   

To keep the rolls soft and fresh, turn the control knob to a low position.  Higher settings should be 

used only for short periods or preheating the warmer.  Keep the drawers as full as possible.  When 

adding new rolls to the drawer, pull the rolls and buns that are left in the drawer toward the front and 

use them first, giving time for the new rolls to become heated.  Do not heat the rolls more than once, 

as they will not be palatable if reheated.  If the rolls dry out, reduce temperature.

NOTE: 

 This unit may smoke and have a slight odor when first used.  We suggest you 

turn the thermostat to a high heat position and let unit heat for approximately two (2) hours 

before using.

ELECTRICAL CONNECTIONS

For your protection, this appliance is equipped with a 3-conductor cord with a grounding type plug.  

Connect only to a grounding receptacle.
Before making any electrical connection to this unit, check that the power supply is adequate for the 

voltage, amperage and requirements stated on the rating plate.   

A wiring diagram is included herewith.

Disconnect the unit from the power source before installing or removing any parts.
Be absolutely sure that the ground connection for the receptacle is properly wired.  Do not connect 

equipment to power without proper ground connections.  Improper grounding may result in personal 

injury or fatality.

DO NOT CUT OR REMOVE THIS PLUG OR GROUNDING PRONG FROM THE PLUG.
CONNECT/PLUG UNIT INTO DEDICATED A.C. LINE ONLY SPECIFIED ON THE DATA 

PLATE OF THE UNIT.

CAUTION

WARNING

WARNING

WARNING

Summary of Contents for SST-20

















Reviews: