9
Cover Use and Removal:
Every Star Cushion comes with a fitted cover to help prevent the cushion cells from
expanding beyond the listed dimensions of the cushion and to aid in slide board
transfers. The bottom of our covers are made of non-skid material, with added Velcro
strips, to help keep the cushion more secure in the chair.
To cover your cushion:
1. Set the cover on a flat surface with the non-skid material facing upward
and the Velcro flap facing you.
2. Open the Velcro flap and insert your cushion into the cover with the air
cells down (if a single or dual valve cushion, the valves will go into the cover
first).
3. Close the Velcro flap and turn the cushion over so cells are facing up.
4. Make sure the valve(s) come out of the corner(s) of the cover for inflation/
deflation. Your cushion is now ready for use as long as it has been properly
adjusted (see Instructions for Use in this manual).
5. Place the covered cushion on the chair. The non-skid material will be on
the bottom, with all air cells covered, and the valve(s) will be showing
through the corner(s). Please reference the label on cushion to verify the
cushion is positioned on the chair correctly.
To remove the cover:
Undo Velcro flap and remove the cushion from the cover.
Reattach Velcro strips before cleaning or inspecting the cover for damage. Replace if
necessary.
