Star Trac Spinning 727-0083, Installation And Service Manual

Page: 23 / 36

20
Star Trac strongly recommends performing the regular daily, weekly and monthly preventive maintenance routines outlined
below. If any items need replacement call
STAR TRAC PRODUCT SUPPORT DEPARTMENT at
(800) 503 -1221, or USA 1-714-669-1660. To order replacement parts we will need the serial number and model number.
D= Daily W= Weekly M=Monthly (depending on the amount of use, some procedures may need to be performed
more frequently)
Preventative Maintenance
D W M Procedure
3
3
3
Daily maintenance of the computer will determine its life of the computer by how consistently it is
performed.
•
Wipe down the computer with a soft cloth after each use.
•
Dilute Simple Green (1) with water (30) (30:1 ratio) spray onto a soft cloth then wipe the Spinner
Computer.
NOTE: Never spray directly onto the Spinner Computer.
•
Never use abrasive cleaning liquids or oil base, ammonia or alcohol when wiping down the computer.
3
3
The weekly maintenance should focus on the overall performance of the computer. During this portion of
the maintenance look for vibration and possible loose assemblies.
•
Inspect each computer for loose parts, bolts and nuts. Adjust as necessary.
•
Remove any computers that are not properly mounted and are deemed unsafe.
3
3
3
3
The monthly maintenance check should be a comprehensive inspection of the overall assembly
components of the computer.
•
Inspect all areas for proper adjustments
•
Inspect all parts to determine damage which will require possible part replacement.
•
Battery Low will display when the battery needs replacement. Replace the batteries in the computer
with 4 High quality AA Alkaline batteries such as Duracell or Energizer.
•
Inspect the mounting of the cadence sensor and magnet to insure it is intact and working properly.
Maintenance Checklist