Preventive Maintenance – Pro Bike (6000 Series)
Created: 06/28/2004
•
Preliminary Service Manual
1.1
Pro Bike (6000 Series) Service Manual
Preventive Maintenance
Do not spray directly on
the display or heart rate
grips.
Spray on cloth first.
Check screws
Tighten pedals
To keep your bike in top condition, Star Trac strongly recommends
performing regular daily, weekly and monthly preventive
maintenance routines outlined below.
Daily Maintenance
•
Remove excessive accumulations of dust, dirt and other
substances by using a clean, soft cloth and a non-abrasive
liquid cleaner, such as Formula 409™ or FANTASTIK ™.
Wipe down the exterior of the display panel, handle bars,
seat, pedals, shrouds and heart rate grips.
Note: DO NOT spray the cleaner directly onto the display panel or
heart rate grips.
Weekly Maintenance
Perform the following services each week:
•
Vacuum the floor under and around the bike. Move the bike
to another spot, if necessary, to vacuum thoroughly.
•
Inspect the screws (i.e. display panel mounting screws) for
security, and retighten if necessary.
•
Inspect the display panel keypads for wear.
Monthly Maintenance
Perform the following services each month, or as needed:
•
Check that the seat, pedals and shroud are secure.
•
Tighten the pedals onto their respective pedal cranks using
a 5/8-inch (15mm) open end wrench.
