Star Trac E-TRxe, Work Instructions

Page: 15 / 52

16
620-7920 Rev A
Step 9.
Connect the main I/O cable (e) to J1 connector
on the display board.
Step 10.
Mount the display assembly to the frame and
note the screw locations (see figure above).
Secure top assembly with (4) M4 screws and
(4) flat 5/16 washers.
Step 11.
Attach ground strap of the display assembly to
the frame with a screw and washer.
Step 12.
Secure the lower left and lower right of the dis-
play assembly with (1) M4 screw and (1) flat
5/16 washer on each side.
Screw Locations