TREADCLIMBER by STAR TRAC - OWNER’S MANUAL | Operating Instructions
43
Item Lowest
Value
Default
Value
Highest
Value
Meaning
LANGUAGE
-
English
-
Language in English, Dutch, French, German, Portuguese, Spanish,
Swedish, Italian or Katakana.
METS
OFF
OFF
ON
ON=METS display enabled.
OFF=METS display disabled.
PAUSE
30
45
120
Pause duration during a program, in seconds, either 30, 45, 60, 90 or
120.
AUTO FAN
OFF
ON
ON
Turns ON the fan 1 minute into the program.
TREADLE OFF ON ON ON=Elevation function enabled.
SENSE
OFF=Elevation function disabled.
AUTO STOP OFF
OFF
ON
ON=Auto stop feature enabled.
OFF=Auto stop feature disabled.
CSAFE OFF
OFF ON ON=CSAFE communication
enabled.
OFF=CSAFE communication disabled.
LOCK OUT
OFF
OFF
ON
ON=Treadmill lock out enabled.
OFF=Treadmill lock out disabled.
LOCKOUT ID 10000
12345
65535
Treadmill lockout ID.
MINIMUM 0.5/0.8 0.5/0.8 2.0/3.2
Minimum
speed
in
mph (UNITS=English), or km/hr (UNITS=Metric).
SPEED*
MAXIMUM
5.0/5.0
10.0/16.0 12.5/20.0 Maximum speed in mph (UNITS=English), or km/hr (UNITS=Metric).
SPEED*
Caution: See Motor Calabration before making any changes.
ACCELERATI- 3
11
30
Time, in seconds, to reach maxmium speed from 0 mph (0 km/hr).
ON TIME
DECELERATI- 3
11
30
Time, in seconds, to reach 0 mph (0 km/hr) from maximum speed.
ON TIME
When the MINIMUM SPEED or MAXIMUM SPEED parameters are changed, unit will perform an auto calibration. To
terminate the auto calibration and return the parameter to its default setting, press the STOP key.
Maintenance Mode
Your Service Representative may need to check accumulated data about the past usage of your unit, test its motor and
display controls, or investigate error messages. For these reasons, your unit
is equipped with Maintenance Mode. Maintenance Mode includes all of the items available through Manager Mode, plus
additional items for Service and Diagnostic use. To enter Maintenance Mode:
1.
Press and hold the
,
and
keys together.
2.
A beep will sound and “MAINTENANCE MODE” will display momentarily in the Information Window.
3.
Release the remaining keys. “MCI VX.XX CKSM XXXX” will display in the Information Window.
