Star Trac 8 SERIES, Owner'S Manual

Page: 26 / 30

24
Maintenance Mode allows access to service and diagnostic information, as well as provides the ability to adjust certain
program default parameters. To enter Maintenance Mode:
1. Press and hold the , and keys together.
2. A beep will sound and “MAINTENANCE MODE” will display momentarily in the Information Window.
3. Release all keys. “SERIAL NO ##### ” will display in the Information Window.
The following keys are available in MAINTENANCE MODE:
NOTE: To exit Maintenance Mode without saving any values or settings, press the QUICK START key.
A complete list of the items that you may display and change in Maintenance Mode:
MAINTENANCE MODE - LCD
Increase and Decrease LEVEL Keys: Adjust the value of the displayed parameter up and down, respectively, in
incre- ments of 1 unit. These keys do not save the new value - see OK Key below.
Numeric Keypad:
Allows you to enter specific values for numeric parameters. These keys do not save the new
value - see OK Key below.
OK Key:
Updates (saves) the values of all parameters in non-volatile memory, and exits Maintenance Mode.
Item Min Max Default Notes
Vx.xx SUM N/A N/A N/A
Display’s primary processor software ver-
sion and checksum. ( V9.58 30014DD8 )
LCB V X.XX N/A N/A N/A
Display’s secondary processor software
version and checksum.
UPDATE SOFTWARE N/A N/A N/A Update console software via USB
SERIAL NUM 0 0 0 TreadClimber serial number.
OPER HOURS 0 0 0 Total operating hours.
DISTANCE 0 0 0
Total TreadClimber miles (UNITS=English),
or km (UNITS=Metric).
UNITS - ENGLISH -
English = units of pounds, miles, hours, min-
utes, seconds, feet, inches;
Metric = units of kilograms, kilometers,
hours, minutes, seconds, centimeters