Group Cycling Computer
Owner’s Manual and Installation Guide 25
Training session distance traveled. Distance is calculated based
upon the revolutions of the flywheel, and is calculated from the
RPMs.
Figure 30
1. To start a training session, press the Start (
) button. This will
start the timer. The timer must be running in order to measure KCAL
and distance.
2. To pause a training session press the pause (
) button.
3. To reset the training session timer, press and hold the Mode (
)
button.
4. To cycle through the data display, press the Mode (
) button.
5. To activate the scan feature, press the Mode (
) button three
times. When the scan feature is activated, the display will cycle
through the data at three second intervals.
6. To deactivate the scan feature press the Mode (
) button.
7. To illuminate the backlight press the Light button. The light button
will illuminate for five seconds then turn off. This setting cannot be
changed.
When powered on, the computer will remain on for five minutes with no
activity.