4
ASSEMBLY INSTRUCTIONS
STEP 1
Attach the Front Stabilizers (pt. 2) to
the Main Frame (pt. 1) using 2 sets of
M8 Domed Nuts (pt. 10),
Ø
8 Curved
Washers
(pt.11)
and
M8x60mm
Carriage Bolts (pt. 4). Slide the Rear
Stabilizer (pt. 5) into the Main Frame
(pt. 1), making sure the open side of
the bracket is facing up, as shown,
then fix with 4pcs
Ø
8X20 Washer
(pt.
9), 2pcs M8x30mm Fixing Bolt (pt. 7)
and 2pcs M8x16mm Fixing Bolt (pt. 8).
STEP 2
Take the Front Post (pt. 12) and join the Upper Computer Wire (pt. 15) with Lower Computer Wire
(pt. 16). Then connect the Tension Cable (pt. 13) to the Tension Hook (pt.14).
(Show Fig.1)
Slide the Front Post (pt.12) into the front post housing, then fix with 4 sets of M8 X 16mm Bolts (pt.
17) and
Ø
8 Curved Washers (pt. 18).
Note: Before connecting the tension cables, please switch the tension knob to "+"
Fig 1.
10
11
9
8
7
6
5
4
3
2
1
17
18
16
15
14
13
19
12
18
17