User Manual
Trouble-shooter for Starmon
©2014 Star-Oddi. All Rights Reserved
Page 8
2.
Starting a New Measurement Sequence
2.1
Communication Errors
1.
Timeout on command echo (no response from recorder).
Check if the cable is properly connected the PC COM port and the recorder.
2.
Other communication errors.
Other communications problems can occur although the recorder is still on-
line. The user is prompted to try starting the recorder again in a new
measurement sequence. If instead, the user chooses to connect to the
recorder again, a CRC error will most likely occur. In that case, the user should
disable the CRC check (Settings Connection).
