CIK Telecom INC
282 Consumers Road,
North York, ON, M2J 1P8
www.ciktel.com
1
)
Please select the PVC to be modified, and press “Edit” button to enter the setting
page.
2
)
The basic setting methods and interface are identical with “4.2.1 Dialing Mode
(Dynamic IP).But they differ on the third step to setup the connection modes. Please
select “Bridge” mode on this and press “Next” to the server name setting as shown below:
Please press “Next” to enter the setting main form after the setup, and check the
correctness of the settings then press “Save” button to complete Bridge Connecting Mode
setting.
4.2.2.2 Requirements to Configure WEB Card of User’s PC:
LAN IP address, subnet mask and gateway (IP address of LAN port on ADSL) must
be preset. Please be noted that every IP address must be at the same IP section as
gateway. If DHCP server feature is enabled, then user only needs to start DHCP on PC