SM SYGNUS SHC USER´S MANUAL
27
GPS Synchronization (MU only):
• External Sync – If an external clock (from GPS or MU) is used to synchronize the MU select Enable, otherwise
select Disable.
• Master/Slave – This field is relevant only if External Sync is enabled. Select Master when the MU acts as the
master unit, which produces the synchronization clock to all other MUs (Slaves). Make sure only one MU is
configured as master in each base station. The slave units are synchronized to the Master clock, and are
configured as “Slave”.
• Signal Count – Shows running number for synchronization input pulses. Running counter indicates
synchronization is active.
AIS Value:
• Set the default value.
Press the Submit button to save the configuration in the unit.
RF Analyzer
The RF Analyzer is used to make a site survey before deploying units in a site. To start the RF Analyzer,
press the “Start” button. The “Clear” button is used to clear the display and RSSI readings. In order to
end the sniffing, press the “Stop” button. If you want to sniff a specific channel, you can choose it from
the list on the right.
Other features available:
• All Channels – If enabled the unit will scan all the channels.
• Poll Interval – Choose the time to scan each channel before advancing to the next channel.
• Save Bitmap – Save the RF Analyzer graph to a bitmap file.
