-
13
-
PAIR
RST
PAIR
RST
“Made for iPod” ,“Made for iPhone” and “Made for iPad” mean that an electronic accessory has been designed to
connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple
performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
iPod is a trademarks of Apple Inc., registered in the U.S. and other countries. iPod touch, iPad and iPhone are
trademark of Apple Inc.
iPod, iPhone and iPad compatibility list
Made for
•
iPod touch (5th generation)
•
iPod touch (4th generation)
•
iPhone 5
•
iPhone 4S
•
iPhone 4
•
iPad (4rd generation)
•
iPad (3rd generation)
•
iPad 2
•
iPad
•
iPad mini
Note: as of December. 2012
RST button
3-7-3. Resetting Bluetooth Settings
The PIN code, device name, and other settings can be reset by following the procedure given below.
(1) Use a fine pointed pen or other similar object to press and hold the RST button. While holding the RST button, turn
the printer's power switch on.
(2) The reset process will begin, and the LED at the front of the printer will flash green. When the settings have been
reset, the LED will stop flashing.
(3) Turn the printer's power switch off, and delete the pairing settings from the master device.
