66
• Line gap dot space setting
This command sets the line gap dot space. Settings using the ESC sequence (ESC, M/m) in
the print text data string are enabled only in the command, but settings using this command
function as default settings.
STX, 91h, ‘M’/’m’, line gap dot space setting, ETX, BCC
Line gap dot space setting parameters
‘0’:
Sets the line gap dot space setting to 0 dot.
‘1’:
Sets the line gap dot space setting to 1 dot.
:
:
‘9’:
Sets the line gap dot space setting to 9 dots.
‘A’:
Sets the line gap dot space setting to 10 dots.
‘B’: Sets the line gap dot space setting to 11 dots.
‘C’: Sets the line gap dot space setting to 12 dots.
‘D’: Sets the line gap dot space setting to 13 dots.
‘E’: Sets the line gap dot space setting to 14 dots.
‘F’:
Sets the line gap dot space setting to 15 dots.
The ex-factory line gap dot space setting is 2 dots.
• Rear side card handling transport speed setting (mechanism part)
This command sets the transport speed when handling cards from the rear side. In the system,
it is possible to synchronize the transport speed of the transport unit mounted on the rear side of
the device.
STX, 91h, ‘S’/‘s’, transport speed setting, ETX, BCC
Transport speed setting parameters
‘1’:
Sets the transport speed to 45 mm/s.
‘2’:
Sets the transport speed to 75 mm/s.
‘3’:
Sets the transport speed to 105 mm/s.
‘4’:
Sets the transport speed to 135 mm/s.
‘5’:
Sets the transport speed to 165 mm/s.
‘6’:
Sets the transport speed to 195 mm/s.
‘7’:
Sets the transport speed to 225 mm/s.
