Star Micronics SP200 Series, User Manual

Page: 3 / 127

– 3 –
Safety Information
Important!
Make sure that the printer is turned off and unplugged from the AC outlet and that the
computer is turned off before making connections.
Important!
Do not connect a telephone line into the peripheral drive connector. Failure to observe this
may result in damage to the printer.
Also, for safety purposes, do not connect wiring to the external drive connector if there is a
chance it may carry peripheral voltage.
Connect the ground wire. (EU only)
Take out the screw shown in the figure below, then fasten the ground wire terminal to the place
where the screw was removed and tighten the screw.
Cable
Separated
Ground Wire