Star Micronics IFBD-HW03 Product Specifications Manual Download | Manualshive

Page: 40 / 47

background image

IFBD-HW03/04 Product Specifications Rev. 0.00

3.5.3. Self-Diagnosis Function Specifications

This product can print the results of a self-diagnosis and contents of the internal settings.

A self-diagnosis print is performed after a test print of the printer when the printer is started.

Example Self-diagnosis Print

01234567890123456789012345678901234567890
+---------------+---------------+---------------+---------------+
Star Micronics IFBD-HW03/04 Ver 1.0.0
Copyright (C) 2004 STAR MICRONICS CO.,
LTD.
Copyright (C) 2004 silex technology, I
nc.

*** Diagnostic report ***
ROM Check

: Ok

ROM stat

: xxxx FFFF 0000 0000

NIC Check

: Ok

NIC Addr

: 00:80:92:12:34:56

EEPROM Check

: Ok

EEPROM Check

: xxxx xxxx 0000 0000

Wireless LAN status : AP Connected
Current SSID

: STAR-WIFI

Current BSSID

: xx:xx:xx:xx:xx:xx

Current Channel   : 5 (1-14)
Region Code      : 42

*** Configuration report ***
  [Web Page Refresh Interval(sec.)]
                :10
<< Configure General >>
  [Change root Password]
                :""
        [NIC Reset Control]
                :ENABLE
<< Configure WiFi – .11b >>
  [Wireless Mode]
                :Infra.
        [SSID]
                :"STAR-WIFI"
  [Channel]
                :11
        [Use WEP]
      :None
        [WEP Key]
                :""
<< Configure TCP/IP >>
  [DHCP/BOOTP]
                :ENABLE
        [RARP]
                :ENABLE
  [IP Address]

                :0.0.0.0
  [Subnet Mask]
                :0.0.0.0
        [Default Gateway]
                :0.0.0.0
        [Universal PnP]
      :DISABLE
  [9100 Multi Session]
                :ENABLE
<< Configure TCP/IP - DNS >>
        [Primary Server]
                :0.0.0.0
  [Secondary Server]
                :0.0.0.0
<< Configure TCP/IP - POP >>
        [POP Protocol]
      :DISABLE
<< Configure TCP/IP - SMTP >>
  [SMTP Protocol]

3-33

«
...
38
39
40
41
42
...
»

Summary of Contents for IFBD-HW03
















































Reviews:

No comments

Related manuals for IFBD-HW03

Brand: Vanguard Pages: 121

INTERNET PRIVACY PROTECTION

Brand: AlphaShield Pages: 49

Adapter Bracket

Brand: Paradyne Pages: 1

Brand: NetBurner Pages: 15

Brand: Klark Teknik Pages: 50

Brand: B&B Electronics Pages: 2

Brand: Uniflair Pages: 24

Brand: National Instruments Pages: 56

Brand: Supermicro Pages: 15

Brand: ProSoft Pages: 53

Brand: Neousys Technology Pages: 39

Brand: Extreme Networks Pages: 51

Brand: Patton electronics Pages: 8

Brand: WatchNet Pages: 2

Brand: PairGain Pages: 76

Linktropy MINI-G

Brand: Apposite Technologies Pages: 57

Compressor DW-CP04

Brand: Digital Watchdog Pages: 73

DynaStar DS2000-IFR

Brand: GarrettCom Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands