10
/
20
© 2010-2021 Star Micronics Co., Ltd.
2.3
How to setup WLAN
2.3.1
Put WiFi Dongle onto USB Type A connector and Ethernet cable to Access Point.
2.3.2
Self-Print
Check the IP address of the IFBD-HI01X/02X by self-print by following below procedure.
- Connect Ethernet cable to the IFBD-HI01X/02X - Printer.
- Turn on the IFBD-HI01X/02X - Printer with pushing the feed button for 5 seconds.
- The IP address of the IFBD-HI01X/02X - Printer is shown in 2nd print paper.
Ethernet Network:
IP Address :xxx.xxx.xxx.xxx (
※
Protocol
)
Subnet Mask :xxx.xxx.xxx.xxx
Default Gateway :xxx.xxx.xxx.xxx
Supported Wi-Fi dongle
Brand
Model
Frequency
F/W
P LANEX
GW-USNANO2A
2.4GHz
1.5.0 or higher
EDIMAX
EW-7811UN
2.4GHz
1.5.0 or higher
D-Link
DWA-182 rev C1
2.4GHz / 5GHz
1.5.0 or higher
LINKSYS
WUSB6300
2.4GHz / 5GHz
1.5.0 or higher
EDIMAX
EW-7811UN V2
2.4GHz
1.9.3 or higher
TRENDnet
TEW-648UBM V2 0R
2.4GHz
1.9.3 or higher
D-Link
DWA-182 HW Ver.D1
2.4GHz / 5GHz
1.9.3 or higher
ASUS
USB-AC53 Nano
2.4GHz / 5GHz
1.9.3 or higher
D-Link
DWA-131 HW Ver.E1
2.4GHz
1.9.3 or higher
