GENERAL INSTALLATION DATA
CAUTION
This equipment is designed and sold for commercial use only by personnel trained and expe-
rienced in its operation and is not sold for consumer use in and around the home nor for use
directly by the general public in food service locations.
Before using your new equipment, read and understand all the instructions & labels associated
with the unit prior to putting it into operation. Make sure all people associated with its use under-
stand the units operation & safety before they use the unit.
All shipping containers should be checked for freight damage both visible and concealed. This
unit has been tested and carefully packaged to insure delivery of your unit in perfect condition. If
equipment is received in damaged condition, either apparent or concealed, a claim must be made
with the delivering carrier.
Concealed damage or loss - if damage or loss is not apparent until after equipment is unpacked,
a request for inspection of concealed damage must be made with carrier within 5 days. Be
certain to retain all contents plus external and internal packaging materials for inspection. The
carrier will make an inspection and will supply necessary claim forms.
WARNING: Improper installation, adjustment, alteration, service or
maintenance can cause property damage, injury or death. Read the
installation, operating and maintenance instructions thoroughly before
installing or servicing the equipment.
This fryer is equipped for the voltage and wattage indicated on the nameplate mounted
on the underside of the front edge. It is designed for use on alternating current (AC)
only. It is intended for use by properly trained personnel only.
WARNING
DO NOT CONNECT TO DIRECT CURRENT (DC)
The installation of the appliance should conform to:
NATIONAL ELECTRIC CODE AND ALL LOCAL ELECTRIC CODES AND
ORDINANCES AND THE LOCAL ELECTRIC COMPANY RULES AND
REGULATIONS
Proper connections and power supply are essential for efficient performance. Connect six foot
lead in cord to a suitable grounded outlet of the correct voltage. Be sure the switch is in the off
position. The receptacle should match the plug (NEMA configuration of receptacle is: 6-30R).
Four legs are provided and should be installed for ease of cleaning. Level unit by adjusting the
(4) feet which have an adjustment of 1-3/8" (35 mm) for accurate leveling and perfect line-up with
other units.
POWER SUPPLY
The Model 301HLD is wired at the factory for operation on a single phase power supply
208/240V, 60 Hz.
CAUTION
DO NOT INSTALL WITHOUT FEET.
PLACE THE LAMINATED WARNING SIGN SUPPLIED WITH THE FRYER IN AN
AREA VISIBLE TO THE FRYER OPERATOR.
OPERATING INSTRUCTIONS