background image

3

GENERAL INSTALLATION DATA

 

 

CAUTION

 This equipment is designed and sold for commercial use only by personnel trained and 

experienced in its operation and is not sold for consumer use in and around the home 
nor for use directly by the general public in food service locations.

 Before using your new equipment, read and understand all the instructions & labels 

associated with the unit prior to putting it into operation.  Make sure all people 
associated with its use understand the units operation & safety before they use the unit.

 All shipping containers should be checked for freight damage both visible and 

concealed.  This unit has been tested and carefully packaged to insure delivery of your 
unit in perfect condition.  If equipment is received in damaged condition, either apparent 
or concealed, a claim must be made with the delivering carrier.

 Concealed damage or loss - if damage or loss is not apparent until after equipment is 

unpacked, a request for inspection of concealed damage must be made with carrier 
within 15 days.  Be certain to retain all contents plus external and internal packaging 
materials for inspection.  The carrier will make an inspection and will supply necessary 
claim forms.

WARNING: Improper installation, adjustment, alteration, service or 
maintenance can cause property damage, injury or death.  Read the 
installation, operating and maintenance instructions thoroughly before 
installing or servicing the equipment.

This fryer is equipped for the voltage and wattage indicated on the nameplate mounted on 
the underside of the front edge.  It is designed for use on alternating current (AC) only.  It 
is intended for use by properly trained personnel only.

 

 

WARNING

DO NOT CONNECT TO DIRECT CURRENT (DC)

The installation of the appliance should conform to the:

NATIONAL ELECTRIC CODE AND ALL LOCAL ELECTRIC CODES AND 
ORDINANCES AND THE LOCAL ELECTRIC COMPANY RULES AND 
REGULATIONS.

Proper connections and power supply are essential for effi cient performance.  Connect six 
foot lead in cord to a suitable grounded outlet of the correct voltage.  Be sure the switch is 
in the off position.  The receptacle should match the plug (NEMA confi guration of receptacle 
is:  6-30R).  Four legs are provided and should be installed for ease of cleaning.  Level unit 
by adjusting the (4) feet which have an adjustment of 1-3/8" (35 mm) for accurate leveling 
and perfect line-up with other units.

POWER SUPPLY

The Model 301HLDS is wired at the factory for operation on a single phase power supply 
208/240V, 60 Hz.

 

 

CAUTION

DO NOT INSTALL WITHOUT FEET PROVIDED.

PLACE THE LAMINATED WARNING SIGN SUPPLIED WITH THE FRYER IN AN 
AREA VISIBLE TO THE FRYER OPERATOR.

Summary of Contents for Superior 301HLDS Series













Reviews: