OPERATOR’S MANUAL
HOLMAN CONVEYOR TOASTERS
MODELS DT14-PS AND DT14-TH
PAGE 5
NOTE: Lubrication of a drive chain with a graphite-based lubricant is required as periodic
maintenance. Call the Holman Cooking Equipment Factory Service Team at 1-800-807-9045 for details.
TROUBLESHOOTING GUIDE
A. UNIT WILL NOT HEAT, CONVEYOR BELT WILL NOT MOVE.
1) Make sure air intake on bottom of unit is clean.
2) Be sure the main circuit breaker is switched to the
ON
position.
3) Check to see if the toaster is plugged in and all controls are turned to the
ON
position.
B. UNIT HAS HEAT ONLY ON ONE SIDE, CONVEYOR BELT TURNS PROPERLY.
1) Call the
Holman Cooking Equipment Factory Service Team at 1-800-807-9054
as heating
element may need replacing.
C. CONVEYOR BELT DOES NOT TURN, UNIT HEATS PROPERLY.
To check for mechanical binding:
1)
DISCONNECT UNIT FROM POWER SOURCE
.
2) When conveyor belt has cooled, move the conveyor belt by hand to check for mechanical binding. If
conveyor moves freely, call the
Holman Cooking Equipment Factory Service Team
at 1-800-807-9054
.
3) Remove the crumb tray(s) and check for obstructions in the conveyor belt.
4) If no obstructions are found, remove the three screws holding side panel in place (facing front of
unit, remove the left side panel to access the lower conveyor drive system and the right side panel
to access the upper conveyor drive system).
5) Check drive chain to make sure it is not jammed on the drive sprocket on the motor or the driven
sprocket on the drive shaft.
6) If the drive chain is not jammed and there are no obstructions to the conveyor belt, call the
Holman
Cooking Equipment Factory Service Team at 1-800-807-9054
as the speed control or drive
motor may need servicing.
