6
GRIDDLE CARE (CHROMIUM
SURFACES)
It takes very little time and effort to keep this
Industrial Chromium griddle surface sparkling
clean and performing at top efficiency.
DO NOT
allow grease to accumulate as it will carbonize and
becomes difficult to remove. To prevent this
condition the following cleaning suggestions
should be followed.
1. Remove excess oil and food regularly with a 4"
(100mm) wide
Razor Sharp
type scraper and
wipe surface with a damp cloth if desired.
2. Following the scraping, for end of the day
cleaning, a damp cloth and a non-silicated,
non-abrasive, non-chlorinated cleaner such as
Bon-Ami may be used to wipe surface clean,
followed by wiping with clean wet cloth.
3. Follow steps 2 and 3 from Griddle Care (Non-
Chromium Surfaces) from page 4.
CAUTION
1.
Never use
Pumice, griddle stones, or
abrasives on the surface.
2
Never
strike griddle surface with sharp
instrument or spatula edge.
3.
Never
use steel wool.
4.
Never
use commercial liquid grill cleaner
on the griddle surface.
5.
Abusing
surface voids the warranty.
GREASE PAN
A grease pan is located at the front and can be
removed from the front for cleaning. This pan
should be checked and emptied when necessary.
CAUTION
EXERCISE EXTREME CARE IN HANDLING
THE GREASE PAN CONTAINING HOT
GREASE.
MAINTENANCE AND REPAIRS
Contact the factory or one of its representatives
or a local service company for service or
maintenance if required.
CHROME-MAX™ GRIDDLE SURFACE
LIMITED WARRANTY EXCLUSIONS
Your Chrome-Max™ griddle has been designed to
give you many years of cooking reliability and
requires minimum maintenance to keep the
chrome surface in its original condition. All
Chrome-Max™ griddle surfaces are warranted for
a period of 5 years against manufacturing defects
to the original owner from the date of installation.
This limited warranty is void if it is determined by
Star Manufacturing International Incorporated or
one of its' authorized representatives that the
chrome surface has been misused or abused or
subjected to the following situations:
1. Improperly installed.
2. By-pass adjustments not set properly on gas
units allowing the appliance to overheat and
discolor the chrome surface. (See by-pass
adjustment in instruction manual supplied
with unit).
3. Incorrect voltage applied to electric
Chrome-Max™ units allowing the surface to
overheat and discolor.
4. The misuse of any instrument or tool which
scratches or makes indentations in the
surface which could cause the surface to
peel, flake, or chip off.
5. The use of any chemical or abrasive
cleaning solution, griddle brick, stone,
screen or other cleaning products which
could damage and affect the performance
of the chrome surface.
6. The neglect of daily routine maintenance to
the chromium surface.
RETAIN THIS MANUAL FOR FUTURE REFERENCE
Part No. 2M-Y7131
Rev. I 9/23/02
Summary of Contents for CHROME-MAX 624TCHS
Page 7: ...11 ...
