-26-
Park-Kill De-activation of Functions
T
The Park-Kill option will automatically shut off the siren when activated by an
external switch (i.e. the vehicle is put in park, a door is opened, etc.).
By default, the Park-Kill option for this unit (described on page 37) only
disables the siren. If you would also like it to automatically disable any of the
outputs tied to your Slide Switch or Push Buttons, change these settings.
Place the PGM DIP switch in this position:
Up
Place the Rotary Knob in this position:
YELP
Place the Slide Switch in this position:
And toggle these buttons:
S1-S7, HORN, MAN
S1-S7
are
Green
:
(Default setting)
Functions tied to each Green button
(S1-
S7)
will NOT automatically deactivate whenever the Park-
Kill function is activated.
HORN
is
Green
:
(Default setting)
Functions tied to
SS
3
3
3
3
output
will NOT
automatically deactivate whenever the Park-Kill function is
activated.
MAN
is
Green
:
(Default setting)
Functions tied to
SS
1
1
1
1
and
SS
2
2
2
2
outputs
will NOT automatically deactivate whenever the Park-Kill
function is activated.
S1-S7
are
Red
: Functions tied to each Red button
(S1-S7)
WILL
automatically deactivate whenever the Park-Kill function is
activated.
HORN
is
Red
: Function tied to
SS
3
3
3
3
output
WILL automatically
deactivate whenever the Park-Kill function is activated.
MAN
is
Red
: Function tied to
SS
1
1
1
1
and
SS
2
2
2
2
outputs
WILL
automatically deactivate whenever the Park-Kill function is
activated.
Once you have programmed your option(s) to the desired setting(s),
you must
flip the PGM DIP switch down to save the changes.
Installation: Detailed Programming
Park-Kill De-activation of Lights
