-1-
Proper installation of the unit is essential for years of safe, reliable operation. Please read
all instructions
before
installing the unit. Failure to follow these instructions can cause
serious damage to the unit or vehicle and may void warranties.
•
The installer must have a firm knowledge of basic electricity, vehicle electrical systems,
and emergency equipment.
•
If you need to drill any holes when installing this light, please take care to check that
BOTH SIDES of your drilling surface are clear from obstructions, to ensure that you do
not damage your vehicle and or pre-existing wiring.
•
Choose a mounting location away from any air bag deployment areas.
•
Controls should be placed within convenient reach of the driver.
•
Use only soap and water when cleaning this product. Use of other chemicals may
discolor the lens and/or housing, thus diminishing the output of the light. Lenses that
have become discolored should be replaced immediately!
•
DO NOT use a pressure washer to clean this light. Use of a pressure washer may
damage the light and WILL VOID THE WARRANTY.
Before beginning the installation:
- Determine where the light is to be mounted.
- Check to see that there are no obstructions hindering the visibility of your light from the front,
rear, or side of the vehicle (wherever applicable).
- Determine where you will mount the switch.
- Verify that you have a clear path between the light and switch for your wires to run.
Installation Notes
Please Note:
These instructions are provided as a general guideline only.
Some
vehicles may require special mounting, wiring, and/or weather-sealing. This is the
sole responsibility of the installer.
Star Headlight & Lantern Co., Inc. assumes no
responsibility for the integrity of the installation for this or any of its products.
NOTICE
Due to continuous product improvements, we must reserve the right to change any specifications and
information, contained in this manual at any time without notice. Star Headlight & Lantern Co., Inc. makes no
warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose. Star Headlight & Lantern Co., Inc. shall not be liable for
errors contained herein or for incidental or consequential damages in connection with the furnishing,
performance, or use of this manual.
It is the sole responsibility of the installer to ensure the warning
light is secure. The manufacturer assumes no responsibility for
the secure mounting of this light.
Summary of Contents for DLX3-RRK
Page 8: ... 7 ...
