Align Holes
Deco Ring
4. CANOPY INSTALLATION
Push up canopy until two pre-screwed screws on Mounting Bracket are engaged with two key holes on Canopy.
Rotate Canopy slightly until two pre-screwed screws heads are engaged in the narrow end of key holes.
Tighten both screws.
Push Deco Ring up to Canopy, align holes on Canopy with ribs on Deco Ring, and push “snap-in”.
Note: Two screws are pre-screwed on Mo unting Bracket for Canopy installation.
1
2
3
4
Key Hole (2)
Canopy
Screw (2)
1
2
3
4
Canopy
P6
www.starfans.co
5. Turn on power at breaker box, Your fan is ready for operation.
Install the ligh t kit
1.Firmly snap the wire
connec tion plu gs together.(Fig.3)
2.Attach the light kit assem bly to
the ligh t kit housing by turning
clockwi se until snug.(Fig.3)
Install the cap for non-light use
1.Raise the cap and secure i t to
the fan by turning the co ver
cloc kwi se until snug.
DO NOT OVERTIGHTEN(Fig.4)
O FF
O FF
O FF
ON
5. LIGHT AND BOTTOM COVER
Fig.4
Fig.3