6
Voltameter:
Indicates the voltage of the battery. It ranges from 20V to 60V from left to
right, including 3 sections highlighted by Red, Yellow and Green. Green represents
the battery is full in capacity. With the consumption of the power, the indicator
will fall from the right to the left gradually.
Gearshift:
There are a total of totally 5 positions. Forward shift includes 1,2,3 and 4.
Reverse shift is R. It is recommended to use 1 for climbing an incline, and to use 2
and 3 for flat roads. It is not recommended to use 4 for driving.
3: Operational Process
1. Switch on the power key;
2. Step the clutch pedal to the bottom, select the right shift and make sure to
use right speed when driving. Selection standard is to make sure that the
working current of motor stays as small as possible as long as this current
is enough for driving.
3. Release the brake pedal.
4. Release the clutch pedal slowly.
5. Step down on the acceleration pedal smoothly, in this case, the vehicle
starts running.
WARNING:
If you step down the acceleration pedal before switching on the power
key, the car will not run. In this case, you should release the acceleration pedal first,
and step it down again, then the vehicle will start running.
