25. Channel Inputs: 2 line and 1 phono inputs are provided for each channel.
Line inputs are used to connect to line level sources such as CD players,
MDs, DATs, samplers, etc. Phono inputs are used to connect to turntables.
26. Ground connector: Connects to the turntable ground connector to eliminate
electrical hum. Ground connectors are usually supplied with turntables
27. Master output: Connects to an amplifier, EQ, crossover, or other outboard
signal processing.
28. Send output: Connects to the input of an outboard signal processor (such as
the NEXT! DJS-24 digital sampler)
29. Return input: Connects to the output of the outboard signal processor to
create an effect loop
30. Power supply connector: Input connection for the accompanying power
supply.
TE C H N I CA L S P E C I FI C AT I O N S
Line inputs:
6
(RCA),
150
mV /
27
K ohm
Phono inputs:
3
(RCA),
3
mV /
47
K ohm
DJ mic input:
2
(XLR, 1/4“),
2.45
mV /
3
K ohm
Effect Send:
1 (1/4”), 775mv
Effect Return:
1 (1/4”), 245mv
Master output:
1
(RCA),
775
mV /
1K
ohm
Record output:
1
(RCA),
245
mV /
10
K ohm
Headphone output:
1
(1/4”),
32
-
200
ohms recommended
Frequency Response:
20
Hz -
20
kHz, +/-
2
dB
Tone Control :
+
9/-26
dB (Hi, Mid, Low)
Mic Tone:
Hi/Mid/Lo
+/-12
dB
Gain Control:
0-20dB
S/N Ratio:
Less than 70dB
T.H.D:
less than
0.2%
Dimension(LxWxD):
14
” x
10
1/4
”
x
4” (356 x 260
x
102
mm)
Weight:
8 lbs (
3.6
Kg)
WA R R A N T Y
This unit has been designed and manufactured using quality
components. Therefore, it is warranted to be free from defects in materi-
als (limited as specified below), and workmanship for a period of twelve
(12) months from the original purchase date. During this period, all
service and parts necessary to repair a defect will be free of charge. This
limited warranty applies to mechanical parts which are subject to wear
and tear as specified:
• Faders, specified durability: 15,000 cycles
• Rotary potentiometers, specified durability: 10,000 cycles
• Switches, specified durability: 10,000 cycles
Consequently, the parts listed above are warranted to be free from
defects in materials and workmanship for a period of thirty days (30)
days from the original purchase date.
FOR THE WA R R A N TY TO BE VA LID, PLEASE CO M PLE TE THE
O N LINE WA R R A N TY REGIST R ATION FORM FOUND AT
W W W. STA N TO N M AG N E TI CS . CO M
