S-250 FUNCTIONS
1) EJECT: Opens the CD door
2) STOP: Stops the CD.
3) SKIP: Skips through the tracks on the CD, forward or
back.
4)
: Scans forward or back through the current track.
This unit features 3 scan speeds. Keep the
or
button pressed for a few seconds to change the scan
speed.
5) PLAY/PAUSE: Plays or pauses the CD. Autocue
function sets the cue point automatically when this
button is used.
6) CUE: Used to recall and preview the cue point.
7) TIME: LCD display reads the time remaining or time
elapsed, according to this button.
8) PITCH: Turns pitch fader ON and OFF.
9) PITCH SELECT: Pressing the PITCH and PITCH BEND
- (minus) buttons simultaneously changes the pitch fader
range b/- 8, 12, and 16%.
10) PITCH BEND: Maximum pitch on this unit is 16%. If the
pitch fader is already physically set to 16%, this function
will not work.
11) SGL/CTN: Switches between Single or Continuous play
modes.
12) LOOP: Press once to set starting loop point, press again
set ending point and enter loop. Press a third time to exit
loop.
13) LCD DISPLAY: Shows time (minutes, seconds, frame),
and pitch information.
14) PITCH FADER: Used to speed up or slow down current
track.
15) AUDIO OUT: This stereo line output connects to the line
input on any DJ mixer.
16) DIGITAL OUTPUT: This coaxial (S/P DIF) digital output
connects to any RCA S/P DIF input, as found on most
standard computer sound cards or CD burners.
17) FADER START: Connects to any DJ mixer equipped
with a fader start input. This enables the user to start the
CD from the cue point, using the mixer
＇
s cross or line
fader, depending on the mixer.
18)
VOLTAGE SELECTOR: Used to select the unit’s voltage
according to the local setting.
Note: The voltage should
preset correctly from the factory, however, make sure to
check it before powering the unit.
19) AC IN: This is the connection for the supplied power
cable.
20) POWER: This button is used to power the unit ON and
OFF.
21) PHONES: Use this stereo jack to connect a pair of
headphones.
*Just for Dual Voltage only.
