Stanley TLS-120T Installation Manual Download Page 14

14

SUNCRAFT SOLUTIONS INC. LIMITED WARRANTY

SUNCRAFT SOLUTIONS INC. LIMITED WARRANTY

SUNCRAFT SOLUTIONS, INC. warrants its products to be free of defects in material and 

workmanship for the product’s Warranty Period. The Warranty Period commences on the original 

purchase date of the product and the sales receipt serves as proof of purchase.

All SUNCRAFT SOLUTIONS, INC. products are covered by a limited product warranty of three (3) 

years for all metal mounts and fixtures and non electrical items.

This Limited Warranty extends only to the original purchaser and is non-transferable. It is 

automatically void if your SUNCRAFT SOLUTIONS, INC. product is modified or altered in any 

way, improperly or incompletely installed, usage of non-supplied hardware and used in a non 

conventional method, exceeding the weight capacity or size restrictions. All  SUNCRAFT SOLUTIONS, 

INC. products are intended for indoors consumer or commercial use only and any outdoor or 

use in areas subject to weather and high humidity, water vapor or exposure to the elements use 

voids this Limited Warranty. The Limited Warranty for all mounts is void if the mount is transferred 

from one location to another. To the maximum extent permitted by applicable law, SUNCRAFT 

SOLUTIONS,INC. disclaims any other warranties, express or implied, including warranties of fitness 

for a particular purpose and warranties of merchantability. SUNCRAFT SOLUTIONS, INC. will not 

be liable for any damages whatsoever arising out of the use or inability to use its products, even if 

SUNCRAFT SOLUTIONS, INC. has been advised of the possibility of such damages. To the maximum 

extent permitted by applicable law, SUNCRAFT SOLUTIONS, INC. disclaims any responsibility for 

incidental or consequential injuries, damages to persons, properties and other items.

For warranty claims made during the stated warranty period, SUNCRAFT SOLUTIONS, INC. will 

replace any defective product part free of charge. Contact SUNCRAFT SOLUTIONS, INC. at 1-855-

816-6868 to make a warranty claim or e-mail [email protected]. Proof of warranty is 

required. This Limited Warranty does not cover the costs of removing and replacing defective parts 

from your SUNCRAFT SOLUTIONS, INC. product. SUNCRAFT SOLUTIONS, INC. assumes no liability 

for any installation, adjustment or other costs.

Summary of Contents for TLS-120T
















Reviews: