background image

is damaged or missing. In the event that replacement parts or hardware are needed, please contact 

Customer Service at 1-855-816-6868 or [email protected] . International customers 

needing assistance should contact the Dealer from which they purchased the product.

The included hardware is designed for use on vertical walls constructed of wood studs or solid 

by 3.5” deep 51 x 102 mm) with a maximum of 5/8” (16 mm) drywall. The included hardware is not 

designed for use with metal studs or cinderblock walls. If you are uncertain or unknowledgeable 

installer for assistance. The wall you are mounting to must support 4 times the weight of the total 

If not, then the  surface must be reinforced to meet this standard. The installer is responsible for 

verifying that the wall structure and hardware used in any installation method will safely support 

the total load.

GENERAL DISCLAIMER

General Disclaimer

Disclaimer – Suncraft Solutions Inc. has extended every effort to ensure the accuracy and 

completeness of this manual. However, Suncraft Solutions Inc. does not claim that the information 

covers all installation, situational or operational variables. The information contained in this 

the information contained herein, Suncraft Solutions Inc. makes no representation of warranty, 

information contained in this document.

WARNING: FAILURE TO READ, THOROUGHLY UNDERSTAND, AND FOLLOW ALL INSTRUCTIONS 

CAN RESULT IN SERIOUS PERSONAL INJURY, DAMAGE TO PERSONAL PROPERTY, OR VOIDING OF 

LIMITED WARRANTY!

It is the responsibility of the installer of this product to ensure all components are properly 

assembled and installed using the instructions provided. If you do not understand these instructions 

or have any questions or concerns, please contact customer service at 1-855-816-6868 or service@

suncraftsolutions.com. Do not attempt to install or assemble this product if the product or hardware 

16

Summary of Contents for TLR-EC3215T

















Reviews: