TIME
RESET
ON/OFF/AUTO MODE
PROG
PAIRING
ON
OFF
WARNING
INSTRUCTIONS
THIS DEVICE COMPLIES WITH PART 15 OF
THE FCC RULES. OPERATION IS SUBJECT
TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND (2) THIS
DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
INITIAL USE:
Before initial use, please plug
in your timer for at least 1 hour to charge the
internal battery. After the LCD display appears,
your unit will be ready for programming.
RESET:
Press the “+” and “-” buttons at the
same time to reset your timer. This will clear all
programmed settings.
SET CURRENT TIME
1. Press and hold the “TIME” button to enter
the current time. First, set the day
of the week: press “+” or “-” button to set
today’s day.
2. Press the “TIME” button to enter the hour
setting. Press the “+” or “-” buttons
to set the current hour. Be sure that AM or
PM appears correctly.
3. Press the “TIME” button to enter the
minute setting, Press the “+” or “-”
buttons to set the current minute.
4. Press the “TIME” button to finish setting
the current time and return to normal
display.
SET MODE
Press & hold the “MODE” button to scroll
between the different mode settings:
SET PROGRAM
After choosing your mode, set the timer
program by holding the “PROG” button for
3 seconds, and then follow the appropriate
section below.
SET PROGRAM: DIGITAL TIMER
1. Set the desired day of the week setting
for your timer using the “+” or “-” button
to scroll between choices. You can select
each day individually, Monday to Friday,
Saturday/Sunday, or the entire week. To
have your timer turn On/Off at the set
times every day of the week, be sure to
push “+” until all 7 days of the week are
lit up.
2. Press “ON/OFF/AUTO” to enter the “PROG
1 ON” hour setting. Press the “+” or “-” to
choose the desired hour for your timer to
turn ON. Be sure to cycle through until AM
or PM appears correctly.
3. Press “ON/OFF/AUTO” to enter the “PROG
1 ON” minute setting. Press the “+” or “-”
to choose the desired minute for your timer
to go on.
4. Press the “PROG” button to enter the
“PROG 1 OFF” setting. Repeat steps 2 & 3
to set your desired Off time.
DISPLAY
MODE
EXPLANATION
Digital Timer
On/off at your exact
programmed times
Photocell
Countdown
Timer
On at Dusk or On
immediately, Off after
1-12 hours
Digital Timer
+ Photocell
On at dusk, off at your
exact programmed
times
