background image

6

7

As soon as you have purchased the Blower, we recommend 
that you check to make sure it is intact and that you read the 
operating instructions carefully before using it.  The purchase 
receipt for this product is to be retained and must be presented 
if making a claim under the terms of the Smart Marketing Group 
(SMG) warranty. Bank account statements are not acceptable 
for proof of purchase.
This warranty does not cover Blower intended for hire or 
use in commercial applications or in commercial premises.  
The warranty will under no circumstances extend to 
reimbursement or payment of damages, whether direct, indirect 
or consequential.  The warranty is void if there is evidence the 
Blower has been modified or tampered with in any way or used 
with unauthorised accessories without our consent.
SMG declines any responsibility or liability whatsoever arising 
from misuse or abuse, negligent handling of the Blower or if 
the product has not been installed or failure to comply with the 
relevant safety, operating, setting and maintenance instructions 
(see further in this manual).
The warranty does not extend to installation or disconnection 
costs.
Any item sent freight forward/collect for repair will be refused.  
Warranty repairs are free of charge, provided the appliance is 
delivered to our service department or authorised service agent.  
The Blower will need to be returned, adequately protected in 
a box.  SMG will not be responsible for any in-transit loss or 
damage.  Assistance under the warranty will only be made 
available if the request is made to our customer service team 
on the contact numbers listed below and proof of purchase is 
provided.
This is a repair only warranty you will need to take the Blower 
to the authorised service agent after contacting our customer 
service centre.
If the product includes various accessories or components, 
only the defective accessory or component will be replaced or 
repaired.
SMG reserves the right to replace defective parts of the 
product with parts and components of similar quality, grade 
and composition where an identical part or component is not 
available.
Products presented for repair may be replaced by refurbished 
products of the same type rather than being repaired.  
Refurbished parts may be used to repair the products.
Damage caused by third party accessories is not covered under 
this warranty.
Damage caused to attached equipment or third party 
accessories will not be covered under this warranty.
Rust and corrosion are not covered under this warranty.
If a warranty fault is found the freight cost will be credited to the 
owner.  If no fault is found the product will be returned and any 

costs associated with the service will be charged to the owner.
Blockages caused by spider webs, insects, dirt, accumulated 
dust or incorrect fuel are not covered by warranty.  SMG 
reserves the right to replace or repair the appliance within 
the warranty period. Parts found to be defective due to a 
manufacturing default will be replaced free of charge.
In the event of SMG choosing to replace the appliance, the 
warranty will expire at the original date of purchase.  If no 
warranty fault is found the owner will be advised and the 
product will be returned and any costs associated with the 
service will be charged to the owner.
Our goods come with guarantees that cannot be excluded under 
the Australian Consumer Law.  You are entitled to a replacement 
or refund for a major failure and for compensation for any other 
reasonably foreseeable loss or damage.  You are also entitled 
to have the goods repaired or replaced if the goods fail to be of 
acceptable quality and the failure does not amount to a major 
failure.  The benefits of this warranty are in addition to any 
rights and remedies imposed by Australian State and Federal 
legislation that cannot be excluded.
In New Zealand, this SMG warranty is in addition to the 
conditions and guarantees which are mandatory as implied by 
the New Zealand Consumer Guarantee Act 1993. For service, 
spare parts or product information please contact customer 
service:
Australia: 1300 660 457
New Zealand: 0800 474 876

COMPLETE WARRANTY STATEMENT - PETROL BLOWER

Summary of Contents for SXPG42603





















Reviews: