6
ENGLISH (
Original Instructions)
4.00
25
Cable length (m)
7.5 15
25
30
45
60
Voltage
Amperes
Cable rated current (Ampere)
110-127
0 - 2.0
6
6
6
6
6
10
2.1 - 3.4
6
6
6
6
15
15
3.5 - 5.0
6
6
10 15
20
20
5.1 - 7.0
10
10
15 20
20
25
7.1 - 12.0
15
15
20 25
25
-
12.1 - 20.0 20
20
25 -
-
-
220-240
0 - 2.0
6
6
6
6
6
6
2.1 - 3.4
6
6
6
6
6
6
3.5 - 5.0
6
6
6
6
10
15
5.1 - 7.0
10
10
10 10
15
15
7.1 - 12.0
15
15
15 15
20
20
12.1 - 20.0 20
20
20 20
25
-
LABELS ON TOOL
The label on your tool may include the following symbols:
WARNING! To reduce the risk of injury, the
user must read the instruction manual before
use.
Wear safety glasses or goggles.
Wear ear protection.
Wear a dust mask.
V
Volts
Direct Current
A
Amperes
n
0
No-Load Speed
Hz
Hertz
Class II
Construction
W
Watts
Earthing
Terminal
min
minutes
Safety Alert
Symbol
Alternating
Current
/min.
Revolutions or
Reciprocation
per minute
Position of date code
The Date Code, which also includes the year of manufacture,
is printed into the housing.
Example:
2020 XX JN
Year of manufacturing
PACKAGE CONTAINS
The package contains:
1 Tile Cutter
1 Socket Wrench
1 Spanner
1 Instruction manual
• Check for damage to the tool, parts or accessories
which may have occurred during transport.
• Take the time to thoroughly read and understand this
manual prior to operation.
FEATURES (Fig A)
WARNING
: Never modify the power tool or any
part of the tool, otherwise it may cause damage
to the tool or result in personal injury.
1. ON/OFF Switch
2. Lock-on button
3. Butterfly screw
4. Base
5. Brush cap
6. Socket wrench
7. Spanner
ASSEMBLY
WARNING
: To prevent accidental operation,
turn off and unplug tool before performing the
following operations. Failure to do this could
result in serious personal injury.
Installing & Removing the Diamond Wheel (Fig. C)
WARNING
: To minimize the danger of serious
personal injury, please switch off the tool power
and disconnect all plugs before adjusting or
removing/installing any accessory. Before
reassembling the tool, press and release the
trigger switch to make sure the tool is already
switched off.
Installation
Grip outside flange with spanner (7) and turn the screw
counterclockwise with the socket wrench (6).
Be sure to tighten clamp blot securely.
Use only the recommended diamond wheel with the correct
hole size.
Removing
Follow the procedures above in reverse order.
Cutting Depth Adjustment (Fig. D)
• To increase or decrease the depth of cut, loosen the
butterfly screw (3), move the base (4) to adjust the depth,
